ASE A4 Suspension and Steering practice questions
210 free questions with answers and explanations.
- 201.A technician is inspecting a vehicle with a clunking noise and excessive play when wiggling the wheel at the 12-6 o'clock positions. The 3-9 o'clock movement is normal. This indicates a problem with the:Wheels and Tires Diagnosis and Repair
- 202.A client complains that their vehicle pulls to the right and they observe uneven wear on the outer shoulder of the left front tire and the inner shoulder of the right front tire. Which alignment angle is MOST likely out of specification?Wheels and Tires Diagnosis and Repair
- 203.A technician is performing a tire pressure monitoring system (TPMS) relearn procedure after replacing a tire. After following the manufacturer's steps, the TPMS light remains on and no sensor data is displayed. Which of the following is the MOST likely reason for this failure?Wheels and Tires Diagnosis and Repair
- 204.A technician is performing a four-wheel alignment on a vehicle with a MacPherson strut front suspension. The alignment machine shows that the front left caster is +1.5 degrees and the front right caster is +3.0 degrees. The specification for caster is +2.5 degrees ± 0.5 degrees. The vehicle exhibits a strong pull to the right. Which of the following adjustments would be the MOST effective to correct the pull and bring caster into specification?Wheel Alignment Diagnosis, Adjustment, and Repair
- 205.A customer reports that after hitting a large pothole, their vehicle now pulls sharply to the left. Upon inspection, the technician notices that the top of the left front tire is visibly leaning outward. Which alignment angle has MOST likely been affected?Wheels and Tires Diagnosis and Repair
- 206.A client complains that their steering wheel is off-center to the left when driving straight. The technician performs a four-wheel alignment and finds all angles are within specification, but the steering wheel is still off-center. Which of the following is the MOST likely cause?Wheel Alignment Diagnosis, Adjustment, and Repair
- 207.A technician is performing a wheel inspection and notices corrosion buildup on the hub mounting surface. The technician should advise the customer that this condition can lead to:Wheels and Tires Diagnosis and Repair
- 208.A technician is performing a four-wheel alignment on a vehicle. The alignment machine displays a front left camber of -0.8 degrees and a front right camber of +0.2 degrees. The specification for camber is 0.0 degrees ± 0.5 degrees. Which of the following statements is true regarding the current camber readings?Wheel Alignment Diagnosis, Adjustment, and Repair
- 209.A technician is performing a pre-purchase inspection on a vehicle. They observe that the inner shoulder of both front tires shows significantly more wear than the outer shoulder. This condition is indicative of:Wheels and Tires Diagnosis and Repair
- 210.A technician is inspecting a vehicle with a severe vibration that occurs only during braking. The vibration is felt strongly through the brake pedal and steering wheel. Which of the following is the MOST likely cause?Wheels and Tires Diagnosis and Repair