New York DMV Permit Written TestRoad SignsHard
You are driving on a multi-lane road and observe a solid white line and a broken white line running parallel to each other, separating two lanes traveling in the same direction. What does this pavement marking typically indicate?
- AIt marks a designated bicycle lane that should not be entered by vehicles.
- BThis indicates a reversible lane that changes direction during peak hours.
- CYou may cross the lines to change lanes only if you are in the lane next to the broken line.
- DCrossing these lines is prohibited for all vehicles at all times.
Show answer & explanationAnswer & explanation
Correct answer: C. You may cross the lines to change lanes only if you are in the lane next to the broken line.
When a solid white line and a broken white line run parallel, it indicates that crossing is permitted from the lane adjacent to the broken line (to enter the adjacent lane), but not from the lane adjacent to the solid line (to exit the adjacent lane). This often marks an HOV lane or a special-use lane.
Why the other options are wrong
- A. Bicycle lanes have distinct symbols and are usually marked differently.
- B. Reversible lanes are typically marked with double broken yellow lines or specific overhead signals.
- D. Crossing is permitted from one side, so it's not prohibited for all vehicles at all times.
Solid and Broken White Lines Parallel
Pavement marking where a solid white line runs parallel to a broken white line, indicating that crossing is permitted only from the side of the broken line.
- Often used for HOV or special-use lanes.
- Allows entry/exit from one direction only.
- Enhances safety by controlling lane changes.
Memory trick: Broken line is permission, solid line is a wall.